EN_US 
DE 
FR 
ES 
PT 
NL 
IT 
Thanks to the smart monitoring platform, EC full series inverter products support remotely shutdown immediately when accident occurs. Setting parameters and FW update remotely, which makes PV plant O&M easier.
» Broken-code screen and 65K HD touch screen (optional)
» Multi-language customization
» PV reverse polarity protection.
» Wide output voltage range
» Battery-side soft starter
| MODEL | SS-H6.2K1L-E1 | SS-H7.2K1L-E1 | SS-H8.5K1L-E1 |
|---|---|---|---|
| Battery Voltage | 48Vdc | ||
| Battery Type | Lead-Acid Battery/Lithium Battery/Gel Battery | ||
| Output | |||
| Rated Output Power | 6200VA/6200W | 7200VA/7200W | 8500VA/8500W |
| Rated Output Voltage | 220Vac/230Vac | ||
| Rated Output Frequency | 50Hz/60Hz ±5 Intelligent Adaptive/Setting | ||
| Output Waveform | Pure sine wave | ||
| Max Conversion Efficiency | 92.0% | ||
| Rated Current | 26.9A | 31.3A | 36.9A |
| Transfer Time | 10ms(Typical value) | ||
| PV input | |||
| Max PV Input Power | 6200W+6200W | 7200W+7200W | 7200W+7200W |
| Max PV Input Current | 18A+18A | ||
| MPPT Voltage Range | 90~500Vdc | ||
| Max PV Input Voltage | 500Vdc | ||
| Max Charging Current | 120A | 140A | 160A |
| Number of MPPT/ Strings per MPPT | 2/1+1 | ||
| Mains/ Generator Input | |||
| Max Charging Current | 60A | 80A | 100A |
| AC Input Voltage Range (UPS mode) | 170~280Vac,±2% | ||
| Frequency Range | 50Hz/60Hz | ||
| Battery Input | |||
| Battery Voltage Range | 40~60Vdc | ||
| Max Charging Current | 120A | 140A | 160A |
| General Parameters | |||
| Dimension, W*D*H(mm) | 330*133*450 | ||
| Installation Method | Wall-mounted | ||
| Weight (kg) | 10.7 | 10.9 | 10.9 |
| Communication Mode | RS485/Dry contact control, Optional WIFI/4G | ||
| Protection function | Grid Overvolt/Undervolt Protection, Grid Overfreq/Underfreq Protection, AC Output Short-Circuit / Overload Protection, High-Temp/Low-Temp Protection | ||
| Operating Environment | |||
| Operating Ambient Temperature | -25℃~60℃( > 45℃ Derating ) | ||
| Storage Ambient Temperature | -20℃~60℃ | ||
| Humidity | 0%~95% Non-condensation | ||
| Altitude | < 2000m | ||
| Installation Environment | For indoor use only | ||
| Certifications | |||
| Certifications | CE、RoHS | ||
| Certifications standard | IEC/EN 61000-6-1/3 , EN62920, CLASS B , IEC 62109-1, IEC 62109-2, IEC 62321 | ||
Optimized circuit design, advanced control algorithms, and high-performance components enable the inverter to deliver extra power beyond its rated capacity, effortlessly driving high-power equipment.
Compatible with lead-acid batteries, lithium batteries, and gel batteries; bypass output is available even when no battery is present, ensuring uninterrupted power to critical loads.
We offer 2 years warranty of the solar inverters and 5 years warranty optional, the maximum life of the inverter can be 10 years at most.
We are building warehouse and service centers in Nigeria, Pakistan, Iraq, Phlippines, you can get more details from “Support-Service” on the website.
IEC62109, IEC/EN62109-1/2, EN61000-6-1/3, UL 1741, CQC, etc,.
No, such modes are IP20, needs to be installed indoor.
93% as usual.
-Single phase 230VAC for residentail users;
-Three phase 380VAC for commercial users;
-Split phase 120&240VAC for US residential users;
-Three phase 480VAC for US commercial users.
Not really.
The noise of the inverter is less than 50dB, similar like the air conditioners working.
Yes, but much lower even than the phones, we have detail introduction in the Technical Topics.
In general, solar inverters are very safe electrical devices, as long as they are properly installed by professionals and selected with good quality.
It depends on the installation and use environment of the inverter. Generally speaking, it is possible. However, it is necessary to strictly follow the original manufacturer’s instructions and must be repaired by professionals.